Sourcing catalog · Showcase 03
Solid wood weaving loom, 52 × 41 cm
One frame, three reeds. We quote it by the piece, and the carton and colourway can be built around your programme.
A small loom is a wooden frame until the first warp goes on. Three things decide whether it earns its place on a shelf: how dry the pine was when it was machined, whether the reed has burrs, and whether the frame holds tension once the wing nuts are tight. None of that shows in a photograph, and almost every return comes from one of the three.
This one is 52 × 41 × 15 cm open and 14 cm folded, with a 33 cm weaving width. The reed lifts out, so the same frame takes 30, 40 or 50 dents per 10 cm — thick wool, medium cotton, fine yarn — without a second machine. That is why it moves in Japan and Southeast Asia, where the loom lives in a cupboard between sessions.
What we can quote on this line
Complete loom
Folding pine frame, one 33 cm reed, a shuttle bobbin, warping stick and wing nuts. It arrives ready to thread — nothing else is needed for the first piece.
52 × 41 × 15 cm
Extra reeds
30, 40 and 50 dents per 10 cm, all 33 cm long. Change the reed, not the machine: thick wool, medium cotton and fine yarn on one frame.
30 / 40 / 50 dents
Build and hardware
Zinc-plated steel, bolted joints and wing nuts that hold tension without a tool. Colour and printed carton are built to your artwork.
Zinc / steel
The tool itself
Photographs from the production line: folded, open, and with a warp on. The frame is the same in every picture; only the reed and the yarn change.
Specification
| Specification | |
|---|---|
| Item | Multi-function folding weaving loom |
| Frame | New Zealand pine, solid |
| Frame joints | Bolted, wing nuts |
| Fittings | Steel, zinc-plated |
| Reed and heddle | Plastic comb plate |
| Open size | 52 × 41 × 15 cm |
| Folded depth | 14 cm |
| Weaving width | 33 cm |
| Reed pitch | 30 / 40 / 50 dents per 10 cm |
| Finish | Natural or brown |
| Gross weight | 2.88 kg per piece |
| Carton | 55.3 × 46.8 × 23 cm |
| Order | From 1 piece; printed carton from 300 |
What we check before it ships
Moisture content
Pine above about 12% moves inside a sea container. The frame arrives with the bolt holes out of line and the customer blames the design. We ask for the kiln record, not the sample.
Reed burrs
Flash on a plastic tooth is invisible and cuts warp threads one at a time. The check is a cotton thread run back and forth through the comb, in both directions.
Plating and wing nuts
Thin zinc goes red in a tropical market within a quarter. A wing nut that strips cannot hold tension, and tension is the whole machine.
Carton corners
A folded frame loads on its corners. Corner protectors and a divider cost very little; a crushed carton costs the order.
This page is the specification, not a stock list and not a price. Colour, carton and logo are built to your artwork.
All categoriesYour product is not on the list?
These sixteen are the lines we run most often, not the limit of what we can source. Send a photo, a drawing, or the item you buy today.